-
A High-Performance Solution for Drying Film or PP Woven Bags-Squeezers
The highest capacity of squeezer machine is a cutting-edge solution designed to efficiently dry film or PP woven bags, revolutionizing the drying process in PP/PE film, PP woven bags. With its advanced technology and exceptional performance, the squeezer machine offers numerous benefits that enhance productivity and product quality. Enhanced Efficiency and energy conservation: The squeezer machine significantly reduces drying times compared to traditional methods. By applying pressure to the... -
Lithium-ion battery separator pelletizing machine
Lithium-ion battery separator pelletizing machine
In simple terms, the membrane is a porous plastic film made of basic materials such as PP and PE and additives. Its main role in lithium-ion batteries is to maintain insulation between the positive and negative electrodes as lithium ions shuttle between them to prevent short circuits. Therefore, an important performance index of the film is its heat resistance, which is expressed by its melting point. At present, most film manufacturers in the world use the wet method, that is, the film is stretched with solvent and plasticizer, and then the pores are formed by solvent evaporation. The highest melting point of the wet-process PE lithium-ion battery separator launched by Tonen Chemical in Japan is 170°C.We can also offer the battery separator pelletizing machine. The battery separator mainly are made from the wet method.
-
Pulverizer and grinder for PE,PVC, PP,ABS
MF seiries model pulverizer and grinder is the disc type grinder. It can process the normal hard rigid plastic like the PE, PVC, PP, AB,PA, EVA, PET,PS,PPS, EPS,PC etc. The final products can be used in the PE rotomoulding etc.
-
Preshredder for the PE agriculture films agriculture irrigating tape and PP woven bags
Preshredder for PE agriculture films
The function of the preshredder is to preshred the agriculture films like LDPE films etc. Even though it is with 70% sand or dust impurity for the mulch films, the preshredder could process without any problem. The greenhouse films can be also processed by the preshredder.
Picture for the mulch and greenhouse films
It features in the large capacity and stable working. The capacity can reach 1500-2000kg/h and 2000-3000kg/h. Below is the technical table for your reference.
-
plastic recycling machine for agriculture film
With well strength of manufacturing ability, PURUI tech has been developed very good machinery and solution to all kinds of waste film recycling, lead acid battery recycling, PET bottle recycling. we delivers recycling solution to customer not only on machine combination, but also in electronic battery waste and lead acid battery
Let’s get started by the most difficult film as topic to talk about :In case of film washing lines specifically dedicated to the recycling of pure agricultural film the key points of the recycling washing process are :
Belt conveyor +trommel + crusher/shredder+horizontal friction washer+high speed friction washer+ floating tank+spiral loader+squeezer+silo
-
single screw extruder for recycling pelletizing system
A single screw extruder is a common type of extrusion machine used in the plastics industry for processing and recycling plastics. It is typically used for processing materials such as squeezed films or rigid flakes, which are common byproducts of plastic manufacturing and recycling processes.
The operation of a single screw extruder involves feeding the plastic material into a hopper, which is then transported along a rotating screw within a heated barrel. The screw applies pressure and heat to melt the plastic and force it through a die, which shapes the plastic into the desired product or form.
To use a single screw extruder for recycling squeezed films or rigid flakes, the material first needs to be prepared by cleaning and shredding it into small, uniform pieces. These pieces are then fed into the hopper of the extruder and processed as described above.
Single screw extruders are versatile machines that can be used for a wide range of plastic processing applications, including recycling and extrusion of various plastic materials. They are widely used in the plastics industry due to their efficiency, reliability, and cost-effectiveness.
-
Hot Sale Good Service Plastic Recycling Washing Machine
PULIER adopts advanced European design, mainly used for washing waste film and woven bag, with output of 1500kg/h Solve the problems in the film washing process, with high-end configuration and high cost performance. Now we have a complete cleaning line for hot sale in stock.
Process introduction
This production line mainly recycles agricultural waste film (agricultural film/greenhouse film/tobacco film, etc.). At present, the agricultural waste film is processed in various parts of the country for centralized processing and recycling, and the degree of equipment automation is increased. PULIER has been involved in the manufacture of waste agricultural film processing and processing equipment for many years, and the equipment is constantly updated, improved and upgraded and solved many problems in the industry through our technologies. After the waste film is collected, it is pre-processed and cut or shredded so as to turn the large rolls of waste film into small pieces and then put it into the sand removal machine for sand removal treatment. Exorbitant sediment content will shorten the service life of the crusher and affect the cleaning effect. After sand removal, the film enters the crusher for fine crushing treatment. Water is added for crushing, which can play the role of preliminary cleaning. A friction washer is equipped at the bottom of the crusher, which can shake the sediment and dirty water on the material out. The spin-dried film enters the strong friction washer for friction cleaning. This section is filled with water for friction cleaning. Our company specially designs this machine for sand removal and cleaning of mulch film. The cleaning sediment is more than 99%. The cleaned film enters the floating washer and is then dug into the squeezing dryer for dehydration. Subsequent can be connected to a granulating line to make granules.processing flow:
1. belt conveyor 2. crusher 3. screw loader 4. horizontal friction washer 5. high speed friction washer 6. screw loader 7. two tapper floating tank
8. horizontal friction washer 9. screw loader 10. water tank 11. horizontal spiral 12. screw loader 13. squeezer machine 14. silo
video please check as bellow links:
https://youtu.be/hVevFKlEYM8
-
single screw extruder with self-cleaning filtration system
PURUI company make and design a new type of self-cleaning filtration system adopts the latest research and development technology, which can realize non-stop cyclic extrusion, especially suitable for heavy pollution plastic granulation. The newest filtration system can treat and remove up to 5% of impurities in the melt. Separable impurities include paper, wood chips, aluminum, non-melting plastics, and rubber.
-
HDPE bottles detergent bottles and milk bottles washing line simple line plastic recycling machine
The HDPE bottles washing machine can used in recycling the HDPE milk bottles recycling, HDPE detergent bottles washing line, HDPE insecticide bottles recycling. It can be customized according to customer requirements. We will give best solutions to reach customer expectation.
-
The infrared preheating devolatilization system
The infrared preheating devolatilization system adopts infrared radiation of the specified wavelength to heat the plastic raw material, such as the PA6/PA66, PBT, PC, PLA, PET and PETG,PP, PE etc.
After reaching the preset temperature, the materials will go to the vacuum module. The release of the colatile components in the cacuum environment is accelerated and desalination drying is cassried out.
-
Gantry Pelletizer for plastics PP PE ABS PA6 PC
Gantry pelletizer are suitable for cold drawn strip pelletizing of various thermoplastic general engineering plastics and modified engineering plastics, such as ABS, PA, PBT, PC, PE, PET POM, PP, PPS, PVC, SAN, etc. . This includes pelletizing basic strips such as glass fiber reinforced and inorganic-filled thermoplastics. It can be used with various small and medium-sized, single and twin screw extruders. The material bar is cooled by the cooling water tank,pass the cooling conveyor belt, enter into the air dryer, and then enters the feed port of the pelletizer. There are traction rollers for forcedly feeding between the fixed knife and the movable knife to make the pellets.
-
Plastic single shaft shredder with pusher for shred PP and PE
The single shaft shredder work as a auxiliary machine for the plastic pelletizing, plastic washing line recycling system. Its function is to reduce the raw materials sizes. For example the plastics like PET fiber, PP woven bags ton bags and PP nonwoven bags, PE agriculture films processing, we need the single shaft to reduce theirs sizes.
